RDL-BS16G4-R3 RAID system with
4 x 1 GbE, 1 x 5 Gbps USB 3.0 and 1 x 6 Gbps eSATA host ports
The RDL-BS16G4-R3 is a cost-effective 16 bay RAID storage subsystem. It is designed to provide a truly innovative multiple host interfaces to address the needs of different cost-effective RAID storage requirements. Correrspondingly configured, the RAIDdeluxe can provide a high degree of fault tolerance by using RAID Level 6 technology and advanced array management features. The 4 port iSCSI, USB 3.0 and eSATA connections deliver high performance, advanced function, high availability, and scalable storage capacity with both direct iSCSI host and IP network connectivity.
RAIDdeluxe-BSxG4-series-datasheet.pdf
The new system features 16 hot-swappable 3.5 LFF 6 Gbps SATA hard disk / SSD drive bays in a 19-inch 3U rackmount unit.
With RAIDdeluxe, the power supply is directly cooled for better airflow. This eliminates pockets of dead air to prevent overheating of the subsystem.
Exceptional Manageability:
- Configuration and monitoring can be managed through the LCD control panel, RS232 port or LAN port
- The firmware-embedded web browser-based RAID manager allows local or remote access from any standard internet browser via a LAN port
- The controller also supports API library, so customers can write their own monitoring tool
- The Single Admin Portal (SAP) monitor utility enables management of multiple RAID units in the same network via a single application
Features:
- Multiple pairs SSD / HDD disk clone function
- Configurable stripe size up to 1024 KB
- 16 hot-swappable 3.5 LFF 6 Gbps SATA hard disk / SSD drive bays
- Single controller with 4 x 1 Gbps iSCSI, 1 x 5 Gbps USB 3.0, 1 x 6 Gbps eSATA
- Multiple RAID 0 and RAID 10 support
- RAID levels 0, 1, 10(1E), 3, 5, 6, 30, 50, 60, Single Disk or JBOD
- Areca RAID-Controller
- ARM 1.2 GHz processor
- Automatic drive failover and detection and rebuild using multiple Global, Dedicated or Enclosure hot-spare drives
- SSD automatic monitor clone support
- Multiple RAID selection
- eSATA host: 8 volumes (with port multiplier), iSCSI host:128 volumes and USB 3.0 host: 8 volumes
- Support for native 4K and 512 byte sector SATA devices
- Support HDD firmware update
- Field-upgradeable firmware in flash ROM
- Firmware-embedded manager via RS-232 port
- API library for customer to write its own monitor utility
- Embedded browser-based RAID manager via built-in 10/100 Lan port
- SAP monitor utility easily manage multiple RAID units in the network
- Access terminal menu by telnet via a LAN port
- LCD control panel for setup, alarm mute and configuration
- System status indication through LCD, LED and alarm buzzer
- SMTP support for email notification
- SNMP support for remote manager
- Enclosure management ready
- Dimensions (H x W x D)
With handles
132,6 x 482 x 484 mm
(5.2 x 18.9 x 19.0 in) - Weight (W/O Drives)
Single: 31 kg