B series 12 bay 3.5 LFF

RDL-BS12G4-R2 RAID system with
4 x  1 GbE, 1 x 5 Gbps USB 3.0 and 1 x 6 Gbps eSATA host ports

 

The RDL-BS12G4-R2 is a cost-effective 12 bay RAID storage subsystem. It is designed to provide a truly innovative multiple host interfaces to address the needs of different cost-effective RAID storage requirements. Correrspondingly configured, the RAIDdeluxe can provide a high degree of fault tolerance by using RAID Level 6 technology and advanced array management features. The 4 port iSCSI, USB 3.0 and eSATA connections deliver high performance, advanced function, high availability, and scalable storage capacity with both direct iSCSI host and IP network connectivity.

RAIDdeluxe-BSxG4-series-datasheet.pdf

The new system features 12 hot-swappable 3.5 LFF 6 Gbps SATA hard disk / SSD drive bays in a 19-inch 2U rackmount unit.

With RAIDdeluxe, the power supply is directly cooled for better airflow. This eliminates pockets of dead air to prevent overheating of the subsystem.

Exceptional Manageability:

  • Configuration and monitoring can be managed through the LCD control panel, RS232 port or LAN port
  • The firmware-embedded web browser-based RAID manager allows local or remote access from any standard internet browser via a LAN port
  • The controller also supports API library, so customers can write their own monitoring tool
  • The Single Admin Portal (SAP) monitor utility enables management of multiple RAID units in the same network via a single application

Features:

  • Multiple pairs SSD / HDD disk clone function
  • Configurable stripe size up to 1024 KB
  • 12 hot-swappable 3.5 LFF 6 Gbps SATA hard disk / SSD drive bays
  • Single controller with  4 x 1 Gbps iSCSI, 1 x 5 Gbps USB 3.0, 1 x 6 Gbps eSATA
  • Multiple RAID 0 and RAID 10 support
  • RAID levels 0, 1, 10(1E), 3, 5, 6, 30, 50, 60, Single Disk or JBOD
  • Areca RAID-Controller
  • ARM 1.2 GHz processor
  • Automatic drive failover and detection and rebuild using multiple Global, Dedicated or Enclosure hot-spare drives
  • SSD automatic monitor clone support
  • Multiple RAID selection
  • eSATA host: 8 volumes (with port multiplier), iSCSI host:128 volumes and USB 3.0 host: 8 volumes
  • Support for native 4K and 512 byte sector SATA devices
  • Support HDD firmware update
  • Field-upgradeable firmware in flash ROM
  • Firmware-embedded manager via RS-232 port
  • API library for customer to write its own monitor utility
  • Embedded browser-based RAID manager via built-in 10/100 Lan port
  • SAP monitor utility easily manage multiple RAID units in the network
  • Access terminal menu by telnet via a LAN port
  • LCD control panel for setup, alarm mute and configuration
  • System status indication through LCD, LED and alarm buzzer
  • SMTP support for email notification
  • SNMP support for remote manager
  • Enclosure management ready
  • Dimensions (H x W x D)
    Without handles
    (3.5 x 17.5 x 17.6 in)
    With handles
    88.2 x 482 x 484 mm
    (3.5 x 18.9 x 19.0 in)
  • Weight (W/O Drives)
    Single: 27 kg (59.5 lb)